Non-rocking sleeves fitting prcedure

The bridge post sleeves are specially designed so that they will restrict any rocking movement of the bridge but there is a slight clearance allowed in the sideways direction. The reason for this is to allow for any inaccuracy in the spacing of the holes in the guitar body, otherwise it is possible the posts may not fit in the holes. Because of this it is important that the sleeves are correctly orientated when fitting. On each sleeve there is a small indication tag, this should point in the direction of the strings when fitted as shown below.

The sleeves are a tight fit on the bridge support posts and should be pushed on as far as they will go.